qtm.settings.export.c3d
Access and modify c3d export settings.
import qtm
qtm.settings.export.c3d.set_exclude_empty(True)
print(qtm.settings.export.c3d.get_exclude_empty())
# True
qtm.settings.export.c3d.set_exclude_partially_labeled(False)
print(qtm.settings.export.c3d.get_exclude_partially_labeled())
# False
zero_baseline_range = {"start": 0, "end": 9}
qtm.settings.export.c3d.set_use_zero_force_baseline(True)
qtm.settings.export.c3d.set_zero_force_baseline_range(zero_baseline_range)
print(qtm.settings.export.c3d.get_zero_force_baseline_range())
# {'start': 0, 'end': 9}
qtm.settings.export.c3d.set_exclude_empty(true)
print(qtm.settings.export.c3d.get_exclude_empty())
-- true
qtm.settings.export.c3d.set_exclude_partially_labeled(false)
print(qtm.settings.export.c3d.get_exclude_partially_labeled())
-- false
zero_baseline_range = {["start"] = 0, ["end"] = 9}
qtm.settings.export.c3d.set_use_zero_force_baseline(true)
qtm.settings.export.c3d.set_zero_force_baseline_range(zero_baseline_range)
print(qtm.settings.export.c3d.get_zero_force_baseline_range())
-- {start = 0, end = 9}
curl --json "[true]" http://localhost:7979/api/scripting/qtm/settings/export/c3d/set_exclude_empty/
curl --json "" http://localhost:7979/api/scripting/qtm/settings/export/c3d/get_exclude_empty/
:: true
curl --json "[false]" http://localhost:7979/api/scripting/qtm/settings/export/c3d/set_exclude_partially_labeled/
curl --json "" http://localhost:7979/api/scripting/qtm/settings/export/c3d/get_exclude_partially_labeled/
:: false
set zero_baseline_range={\"start\": 0, \"end\": 9}
curl --json "[true]" http://localhost:7979/api/scripting/qtm/settings/export/c3d/set_use_zero_force_baseline/
curl --json "[%zero_baseline_range%]" http://localhost:7979/api/scripting/qtm/settings/export/c3d/set_zero_force_baseline_range/
curl --json "" http://localhost:7979/api/scripting/qtm/settings/export/c3d/get_zero_force_baseline_range/
:: {"end":9,"start":0}
get_exclude_unidentified
Get whether to exclude unidentified trajectories.
qtm.settings.export.c3d.get_exclude_unidentified()
Returns
bool
set_exclude_unidentified
Set whether to exclude unidentified trajectories.
qtm.settings.export.c3d.set_exclude_unidentified(enable)
Parameters
enable bool
True if unidentified trajectories should be excluded, otherwise false.
get_exclude_empty
Get whether to exclude empty trajectories.
qtm.settings.export.c3d.get_exclude_empty()
Returns
bool
set_exclude_empty
Set whether to exclude empty trajectories.
qtm.settings.export.c3d.set_exclude_empty(enable)
Parameters
enable bool
True if empty trajectories should be excluded, otherwise false.
get_exclude_partially_labeled
Get whether to exclude partially labeled frames.
qtm.settings.export.c3d.get_exclude_partially_labeled()
Returns
bool
set_exclude_partially_labeled
Set whether to exclude partially labeled frames.
qtm.settings.export.c3d.set_exclude_partially_labeled(enable)
This will override the exported range.
Parameters
enable bool
True if partially labeled frames should be excluded, otherwise false.
get_use_full_label
Get whether to use full labels.
qtm.settings.export.c3d.get_use_full_label()
Returns
bool
set_use_full_label
Set whether to use full labels.
qtm.settings.export.c3d.set_use_full_label(enable)
Parameters
enable bool
True if full labels should be used, otherwise false.
get_use_relative_event_time
Get whether to use relative event times.
qtm.settings.export.c3d.get_use_relative_event_time()
Returns
bool
set_use_relative_event_time
Set whether to use relative event times.
qtm.settings.export.c3d.set_use_relative_event_time(enable)
If enabled, event times will be relative to the start of the exported range.
Parameters
enable bool
True if relative event times should be used, otherwise false.
get_use_zero_force_baseline
Get whether to use zero force baseline.
qtm.settings.export.c3d.get_use_zero_force_baseline()
Returns
bool
set_use_zero_force_baseline
Set whether to use zero force baseline.
qtm.settings.export.c3d.set_use_zero_force_baseline(enable)
Parameters
enable bool
True if zero force baseline should be used, otherwise false.
get_zero_force_baseline_range
Get the zero force baseline range.
qtm.settings.export.c3d.get_zero_force_baseline_range()
Returns
{"start": integer, "end": integer}
set_zero_force_baseline_range
Set the zero force baseline range.
qtm.settings.export.c3d.set_zero_force_baseline_range(range)
This method requires zero force baseline to be enabled (see 'set_use_zero_force_baseline').
Parameters
range {"start": integer, "end": integer}
The zero force baseline range.
get_length_units
Get the length units.
qtm.settings.export.c3d.get_length_units()
Returns
"mm"|"cm"|"m"
set_length_units
Set the length units.
qtm.settings.export.c3d.set_length_units(units)
Parameters
units "mm"|"cm"|"m"
The length units.
help
Get the documentation for a module or method.
qtm.settings.export.c3d.help(method?)
Parameters
method string?
The name of the method (if null, the documentation for the module will be returned instead).
Returns
string